Suspension
Specifications
In this manual: Suspension
~2min read
Wheel Alignment Specifications - North America
| Item | left | Right Side | Split | Thrust Angle |
|---|---|---|---|---|
| Front | ||||
| Camber (Base)a | -0,70° ± 0,75° | -0,70° ± 0,75° | 0,0° ± 0,75° | — |
| Camber (ST)a | -1,18° ± 0,75° | -1,18° ± 0,75° | 0,0° ± 0,75° | — |
| Caster (Base)a | 3,37° ± 0,75° | 3,37° ± 0,75° | 0,0° ± 0,75° | — |
| Caster (ST)a | 3,78° ± 0,75° | 3,78° ± 0,75° | 0,0° ± 0,75° | — |
| Toe (Base) @ Curb Height (positive value indicates toe-in, negative value indicates toe-out) | — | — | 0,15°± 0,20° | — |
| Toe (ST) @ Curb Height (positive value indicates toe-in, negative value indicates toe-out) | — | — | 0,20°± 0,20° | — |
| Rear | ||||
| Camber (Base)a | -1,52° ± 0,75° | -1,52° ± 0,75° | — | — |
| Camber (ST)a | -0,64° ± 1,25° | -0,64° ± 1,25° | — | — |
| Toe (Base) | — | — | — | 0,0° ± 0,50° |
| Toe (ST) | — | — | — | 0,0° ± 0,50° |
aNominal setting (for reference only) without adjustment.
Front Wheel Alignment Specifications - South America
| Description | Measurements | Tolerance Range | Setting or Nominal | Maximum Left-to-Right Variation |
|---|---|---|---|---|
| Caster Angle | Degrees and Minutes | 2°20' to 4°20' | 3°20' | 1°00' |
| Decimal Degrees | 2.34° to 4.34° | 3,34° | 1,00° | |
| Camber Angle | Degrees and Minutes | -1°34' to 0°34' | 0°-40' 52" | 1°15' |
| Decimal Degrees | -1.56° to 0.57° | -0,68° | 1,25° | |
| Total Toe | Degrees and Minutes | 0°-9' Toe ± 0°33' | 0°12' | - |
| Decimal Degrees | -0.15° Toe ± 0.55° | 0,2° | - |
Rear Wheel Alignment Specifications - South America
| Description | Measurements | Tolerance Range | Setting or Nominal | Maximum Left-to-Right Variation |
|---|---|---|---|---|
| Camber Angle | Degrees and Minutes | -2°46' to -0°16' | -1°31' | 1°25' |
| Decimal Degrees | -2.77° to -0.27° | -1,52° | 1,15° | |
| Total Toe | Degrees and Minutes | 0°4' Toe ± 0°34' | Toe 0°19' * | - |
| Decimal Degrees | 0.06° Toe ± 0.56° | Toe 0.31° * | - |
*Nominal setting (for reference only) without adjustment
General Specifications - North America
| Item | Specification |
|---|---|
| Ball Joint Deflection | |
| Lower | 0–0.2 mm (0–0.008 in) |
| Ground Clearance | |
| Front (Base) | 16.4 mm (0.646 in) ± 10 mm (0.393 in) |
| Front (ST) | 11.8 mm (0.464 in) ± 14 mm (0.551 in) |
| Rear (Base) | 40.3 mm (1.587 in) ± 10 mm (0.393 in) |
| Rear (ST) | 14.9 mm (0.587 in) ± 14 mm (0.551 in) |
Test yourself
A quick Ford Fiesta quiz: every answer comes with an explanation and a link to the manual page.
Was this page helpful?