Ford Focus Quiz
Powertrain

Crankcase Vent Oil Separator

In this manual: Powertrain
Vehicle - General — 4Accessories — 40Body — 237Chassis — 113Electrical — 19HVAC — 44Powertrain — 292
4steps
~24min
2/5difficulty
01020304050107N·mlb·ft
Tightening torque found on this page
Done 0 of 4
Removal and Installation
Item Part Number Description
1 W500214 Crankcase vent oil separator bolt (8 required)
2 6A785 Crankcase vent oil separator
3 — Retainer clip (part of 6A785)
4 6B752 Crankcase vent oil separator gasket
5 18C266 Bypass hose

  1. Remove the intake manifold. For additional information, refer to Section 303-01.
  2. Release the bypass hose from the retainer clip and position aside.
  3. Remove the 8 bolts, crankcase vent oil separator and the gasket.
    • To install, tighten to 10 N·m.
  4. NOTE: Clean and inspect the gasket mating surfaces.

    To install, reverse the removal procedure.

    • Inspect and replace the crankcase vent oil separator gasket as necessary.

Test yourself

A quick Ford Focus quiz: every answer comes with an explanation and a link to the manual page.