Ford Focus Quiz
Powertrain

Evaporative Emission Canister Vent Solenoid

In this manual: Powertrain
Vehicle - General — 4Accessories — 40Body — 237Chassis — 113Electrical — 19HVAC — 44Powertrain — 292
2steps
~12min
1/5difficulty
Done 0 of 2

Item Part Number Description
1 9E857 Evaporative Emission (EVAP) canister
2 9F945 EVAP canister vent solenoid

Removal and Installation WARNING: Do not
smoke, carry lighted tobacco or have an open flame of any type when working on or near any fuel-related component. Highly flammable mixtures are always present and may be ignited. Failure to follow these instructions may result in serious personal injury. WARNING: Do not
carry personal electronic devices such as cell phones, pagers or audio equipment of any type when working on or near any fuel-related component. Highly flammable mixtures are always present and may be ignited. Failure to follow these instructions may result in serious personal injury. WARNING: Always
disconnect the battery ground cable at the battery when working on an evaporative emission (EVAP) system or fuel-related component. Highly flammable mixtures are always present and may be ignited. Failure to follow these instructions may result in serious personal injury.
  1. Remove the Evaporative Emission (EVAP) canister. For additional information, refer to Evaporative Emission Canister in this section.
  2. Depress the locking tab outward, rotate the EVAP canister vent solenoid clockwise and remove it from the EVAP canister.
  1. NOTE: Do not apply oil to the EVAP canister O-ring seal. Clean water may be applied to aid reassembly.

    To install, reverse the removal procedure.

    • Carry out the Evaporative Emission System Leak Test. For additional information, refer to Evaporative Emission System Leak Test in this section.

Test yourself

A quick Ford Focus quiz: every answer comes with an explanation and a link to the manual page.