Power Transfer Unit Fluid Level Check. General Procedures

Materials

Check

1. 1
   Position the vehicle in NEUTRAL on the lift.
   Refer to: Jacking and Lifting - Overview (100-02 Jacking and Lifting, Description and Operation).
2. 2
   If equipped.
   Remove the retainers and the underbody shield.

   

3. 3
   Remove the PTU fill plug.

   

4. 4
   Fill the PTU with clean fluid to the level of the fill plug.
   Material: Motorcraft® SAE 75W-140 Synthetic Rear Axle Lubricant / XY-75W140-QL (WSL-M2C192-A)

   

5. 5
   Install the PTU fill plug.
   Torque: 33 lb-ft (45 N·m)

   

6. 6
   If equipped.
   Install the underbody shield.