Ford Mustang Quiz
Engine

Camshaft Roller Follower

In this manual: Engine
Service Information — 34Suspension — 63Driveline — 80Brake System — 74Steering System — 42Engine — 329Automatic Transmission — 84Manual Transmission, Clutch and Transfer Case — 64Exhaust System — 8Fuel System — 39Climate Control System — 76Instrumentation and Warning Systems — 25Battery and Charging System — 19Audio Systems — 14Lighting — 24Electrical Distribution — 8Electronic Feature Group — 11Body — 173Frame and Mounting — 6General Information — 1
~1min read
2special tools

Special Tool(s)

Compressor, Valve Spring (Intake) 303-452 (T93P-6565-AR)
Compressor, Valve Spring (Exhaust) 303-567 (T97P-6565-AH)

Removal

1. Remove the valve cover. For additional information, refer to Valve Cover LH or Valve Cover RH in this section.

2. Position the piston of the cylinder being serviced at the bottom of the stroke and the camshaft lobe at base circle.

3. Using the special tool compress the intake valve spring.

Camshaft Roller Follower

4. Remove the roller follower from the intake valve.

Camshaft Roller Follower

5. Using the special tool compress the exhaust valve spring.

Camshaft Roller Follower

6. Remove the camshaft roller follower from the exhaust valve.

Camshaft Roller Follower

7. Repeat Steps 2, 3 and 4 to remove all the necessary roller followers. Inspect roller finger followers and camshafts. For additional information, refer to Section.

Installation

1. To install, reverse the removal procedure.

Test yourself

A quick Ford Mustang quiz: every answer comes with an explanation and a link to the manual page.