Exhaust Manifold RH

Special Tool(s)

	Lifting Bracket, Engine 303-D088 (D93P-6001-A2)
	Support Bar, Engine 303-290-A

Removal and Installation

1. Install the special tool.

2. Install the special tools.

3. Raise and support the vehicle. For additional information, refer to Section.

4. Remove the LH and RH side engine mount nuts.

5. Lower the vehicle.

6. Using the special tools, raise the engine.

7. Remove the air cleaner outlet tube. For additional information, refer to Section.

8. Raise and support the vehicle.

9. Remove the starter motor. For additional information, refer to Section.

10. Separate the exhaust at the exhaust manifold. For additional information, refer to Section.

11. Remove the exhaust manifold.

1. Remove the exhaust manifold nuts.

2. Remove the exhaust manifold.

3. Remove the exhaust manifold gasket and discard.

12. NOTE: Tighten the exhaust manifold nuts in the sequence shown.

To install, reverse the removal procedure.