Ford Mustang Quiz
Engine

Valve Cover LH

In this manual: Engine
Service Information — 34Suspension — 63Driveline — 80Brake System — 74Steering System — 42Engine — 329Automatic Transmission — 84Manual Transmission, Clutch and Transfer Case — 64Exhaust System — 8Fuel System — 39Climate Control System — 76Instrumentation and Warning Systems — 25Battery and Charging System — 19Audio Systems — 14Lighting — 24Electrical Distribution — 8Electronic Feature Group — 11Body — 173Frame and Mounting — 6General Information — 1
~1min read

Material

Item Specification
Silicone Gasket and Sealant F7AZ-19554-EA or equivalent WSE-M4G323-A4

Removal and Installation

1. Position the oil level tube (6754) out of the way.

Valve Cover RH

2. Disconnect the breather tube.

Valve Cover RH

3. Separate the engine wiring harness in the locations shown.

Valve Cover RH

4. Disconnect the engine wiring harness retainer and position it aside.

Valve Cover RH

5. Remove the bolts, studs and the valve cover in the sequence shown.

  • Inspect and clean the sealing surfaces.
Valve Cover RH

6. NOTE: Apply an eight millimeter bead of silicone gasket and sealant at the intersection of the engine front cover and the cylinder head.

To install, reverse the removal procedure.

Valve Cover RH

Test yourself

A quick Ford Mustang quiz: every answer comes with an explanation and a link to the manual page.