Ford Mustang Quiz
Engine

Cooling Fan Motor and Shroud

In this manual: Engine
Service Information — 34Suspension — 63Driveline — 80Brake System — 74Steering System — 42Engine — 329Automatic Transmission — 84Manual Transmission, Clutch and Transfer Case — 64Exhaust System — 8Fuel System — 39Climate Control System — 76Instrumentation and Warning Systems — 25Battery and Charging System — 19Audio Systems — 14Lighting — 24Electrical Distribution — 8Electronic Feature Group — 11Body — 173Frame and Mounting — 6General Information — 1
~1min read

Removal and Installation

1. Disconnect the battery ground cable.

2. Remove the degas bottle or coolant expansion tank. For additional information, refer to Degas Bottle-4.6L(2V) and 4.6L(4V) in this section.

3. Disconnect the cooling fan electrical connector.

Cooling Fan Motor and Shroud

4. Separate the fan harness from the shroud.

Cooling Fan Motor and Shroud

5. Remove the LH bolt.

Cooling Fan Motor and Shroud

6. Remove the RH bolt.

Cooling Fan Motor and Shroud

7. Remove the fan, motor and shroud.

Cooling Fan Motor and Shroud

8. To install, reverse the removal procedure.

Test yourself

A quick Ford Mustang quiz: every answer comes with an explanation and a link to the manual page.