Ford Mustang Quiz
Engine

Bypass Tube - Mach I

In this manual: Engine
Service Information — 34Suspension — 63Driveline — 80Brake System — 74Steering System — 42Engine — 329Automatic Transmission — 84Manual Transmission, Clutch and Transfer Case — 64Exhaust System — 8Fuel System — 39Climate Control System — 76Instrumentation and Warning Systems — 25Battery and Charging System — 19Audio Systems — 14Lighting — 24Electrical Distribution — 8Electronic Feature Group — 11Body — 173Frame and Mounting — 6General Information — 1
~1min read

Material

Item Specification
Motorcraft Premium Gold Engine Coolant VC-7-A (in Oregon VC-7-B) (yellow color) WSS-M97B51- A1

Removal and Installation

1. Remove the air intake scoop and bracket. For additional information, refer to Section.

2. Drain the engine coolant. For additional information, refer to Cooling System Draining, Filling and Bleeding in this section.

3. Disconnect the upper radiator hose from the bypass tube.

Bypass Tube - Mach I

4. Disconnect the lower radiator hose.

Bypass Tube - Mach I

5. Disconnect the engine temperature control (ECT) sensor electrical connector.

Bypass Tube - Mach I

6. Remove the bolts and the bypass tube.

Bypass Tube - Mach I

7. NOTE: Do not cut the O-ring seal during tube installation into cylinder heads or engine coolant leakage may occur.

To install, reverse the removal procedure

8. Fill the cooling system. For additional information, refer to Cooling System Draining, Filling and Bleeding in this section.

Test yourself

A quick Ford Mustang quiz: every answer comes with an explanation and a link to the manual page.