Ford Mustang Quiz
Engine

Thermostat - 3.8L

In this manual: Engine
Service Information — 34Suspension — 63Driveline — 80Brake System — 74Steering System — 42Engine — 329Automatic Transmission — 84Manual Transmission, Clutch and Transfer Case — 64Exhaust System — 8Fuel System — 39Climate Control System — 76Instrumentation and Warning Systems — 25Battery and Charging System — 19Audio Systems — 14Lighting — 24Electrical Distribution — 8Electronic Feature Group — 11Body — 173Frame and Mounting — 6General Information — 1
~1min read

Material

Item Specification
Gasket Adhesive TA-6 or equivalent WSS-M2G408- A
Motorcraft Premium Gold Engine Coolant VC-7-A (in Oregon VC-7-B) (yellow color) WSS-M97B51- A1

Removal and Installation

1. Drain the engine coolant. For additional information, refer to Cooling System Draining, Filling and Bleeding in this section.

2. Disconnect the upper radiator hose from the coolant hose connection.

Thermostat - 3.8L

3. Remove the thermostat housing.

  • Remove the bolts.
Thermostat - 3.8L

4. Remove the thermostat.

  • Clean and inspect the water outlet connection.
  • Discard the thermostat gasket, and clean and inspect the mating surface.
Thermostat - 3.8L

5. Clean and inspect the thermostat mating surface at the engine.

Thermostat - 3.8L

6. NOTE: The thermostat is indexed and must be returned to the original location.

To install, reverse the removal procedure.

7. Fill the cooling system. For additional information, refer to Cooling System Draining, Filling and Bleeding in this section.

Test yourself

A quick Ford Mustang quiz: every answer comes with an explanation and a link to the manual page.