Crankshaft Pulley

Special Tool(s)

	Remover, Crankshaft Vibration Damper 303-009 (T58P-6316-D)
	Remover, Crankshaft Vibration Damper 303-176 (T82L-6316-B)
	Installer, Crankshaft Damper/Crankshaft Front Oil Seal 303-175 (T82L-6316-A)

Material

Removal

1. Remove the drive belt (8620). For additional information, refer to Section.

2. Remove the radiator coolant recovery reservoir (8A080).

3. Raise the vehicle on a hoist. For additional information, refer to Section.

4. Remove the crankshaft pulley bolt.

5. Using the special tool, remove the crankshaft pulley (6B321).

Installation

1. Apply a bead of silicone gasket and sealant to the keyway in the crankshaft damper and use the special tool to install the crankshaft pulley.

2. Install the crankshaft bolt.

3. Lower the vehicle.

4. Install the radiator coolant recovery reservoir.

5. Install the drive belt. For additional information, refer to Section.