Ford Mustang Quiz
Engine

Valve Tappets

In this manual: Engine
Service Information — 34Suspension — 63Driveline — 80Brake System — 74Steering System — 42Engine — 329Automatic Transmission — 84Manual Transmission, Clutch and Transfer Case — 64Exhaust System — 8Fuel System — 39Climate Control System — 76Instrumentation and Warning Systems — 25Battery and Charging System — 19Audio Systems — 14Lighting — 24Electrical Distribution — 8Electronic Feature Group — 11Body — 173Frame and Mounting — 6General Information — 1
~1min read

Material

Valve Tappets

Removal

CAUTION: If removing more than one valve tappet, mark the components removed for correct location.

1. Remove the lower intake manifold. For additional information, refer to Lower Intake Manifold in this section.

2. Remove the push rods. For additional information, refer to Push Rod .

3. Remove the eight valve tappets.

1. Remove the bolts.

2. Remove the tappet guide plate and retainer.

3. Remove the valve tappets.

Valve Tappets

Installation

1. NOTE: Lubricate the valve tappet with clean engine oil before installing.

To install, reverse the removal procedure.

Valve Tappets

Test yourself

A quick Ford Mustang quiz: every answer comes with an explanation and a link to the manual page.