Ford Mustang Quiz
Engine

Exhaust Manifold RH

In this manual: Engine
Service Information — 34Suspension — 63Driveline — 80Brake System — 74Steering System — 42Engine — 329Automatic Transmission — 84Manual Transmission, Clutch and Transfer Case — 64Exhaust System — 8Fuel System — 39Climate Control System — 76Instrumentation and Warning Systems — 25Battery and Charging System — 19Audio Systems — 14Lighting — 24Electrical Distribution — 8Electronic Feature Group — 11Body — 173Frame and Mounting — 6General Information — 1
~1min read

Removal and Installation

1. Disconnect the battery negative cable. For additional information, refer to Section.

2. Remove the air cleaner outlet pipe. For additional information, refer to Section.

3. Disconnect the differential pressure feedback exhaust gas recirculation (EGR) system electrical and vacuum connections.

Exhaust Manifold RH

4. Disconnect the EGR tube.

Exhaust Manifold RH

5. Remove the EGR tube.

Exhaust Manifold RH

6. Raise and support the vehicle. For additional information, refer to Section.

7. Remove the LH exhaust manifold flange nuts.

Exhaust Manifold RH

8. Remove the RH exhaust manifold flange nuts.

Exhaust Manifold RH

9. Lower the vehicle.

10. NOTE: Discard the exhaust manifold gasket.

Remove the RH exhaust manifold retaining nuts and the RH exhaust manifold.

Exhaust Manifold RH

11. To install, reverse the removal procedure. Tighten the exhaust manifold nuts in the sequence shown.

Exhaust Manifold RH

Test yourself

A quick Ford Mustang quiz: every answer comes with an explanation and a link to the manual page.