ATF Warmer Repair Procedures

Removal

1. 1
   Remove the under cover. (Refer to Engine Mechanical System - "Engine Room Under Cover")
2. 2
   Loosen the drain plug and drain the engine coolant. (Refer to Cooling System - "Coolant")
3. 3
   Disconnect the cooling hose (A) after removing the clamp.

   

4. 4
   Disconnect the hose (A) after removing the hose clamp from the automatic transmission fluid cooler.

   

   Carefully install the clamp so as not to damage the hose. Install the clamp in the correct direction so that it does not interfere with other parts. After installation, start the engine and check the hose for leaks.

5. 5
   Remove the ATF warmer (A) from the valve body cover.

   Tightening torque: 7.8 ~ 11.8 N·m

   

Installation

1. 1
   To install, reverse the removal procedure.
2. 2
   Fill the engine with coolant. (Refer to Cooling System - "Coolant")
3. 3
   After checking the fluid level, add fluid to the automatic transmission. (Refer to Hydraulic System - "Fluid")