Description and Operation

Warning Lamp Activation

Warning Lamp Behavior After Ignition ON

As soon as operating voltage is supplied to the SRSCM ignition input, the SRSCM activates the warning lamp for an LED lamp check. The lamp should illuminate for 6 seconds during the initialization phase and then turn off. To warn the driver, the warning lamp illuminates for 6 seconds and turns off for one second, then remains on continuously after operating voltage is supplied if any active fault is present.

1. 1
   Active fault.

   

2. 2
   Normal or history fault only.

   

3. 3
   When the ignition is turned on during End-of-Line (EOL) variant coding, the airbag warning lamp illuminates and flashes periodically at 1-second intervals until coding is completed. If variant coding is completed normally, the airbag warning lamp illuminates for 6 seconds and then turns off. Otherwise, the airbag warning lamp flashes continuously at 1-second intervals.

   1. If variant coding is completed normally

      

   2. If variant coding is not completed

      

   If an active fault is present in the airbag system or an internal SRSCM fault exists, End-of-Line (EOL) variant coding cannot be completed. In this case, repeat the EOL variant coding procedure after troubleshooting with GDS.
4. 4
   Loss of SRSCM battery power: warning lamp remains on continuously.
5. 5
   Loss of internal operating voltage: warning lamp remains on continuously.
6. 6
   Loss of microprocessor operation: warning lamp remains on continuously.
7. 7
   SRSCM not connected: warning lamp remains on continuously.

   

Independent Activation of the SRSCM Warning Lamp: Certain failure conditions exist in which the SRSCM cannot function and therefore cannot control the standard warning lamp operation. In these cases, the standard warning lamp is activated directly by the relevant circuit, which operates independently of the SRSCM. These cases are: Warning Lamp Activation: The warning lamp indicates that the passenger airbag (PAB) is on or off, depending on the occupant status in the passenger seat. If the passenger seat is empty or occupied by a child (or child seat), the passenger airbag is disabled and the warning lamp illuminates to inform the driver that the PAB is off. As soon as operating voltage is supplied to the SRSCM ignition input, the SRSCM activates the warning lamp for a check. The OCS (Occupant Classification System) will send an undetermined status to the SRSCM as the default setting for passenger airbag deployment during the test period. After the ignition is switched on, the warning lamp illuminates for 4 seconds and turns off for 3 seconds during the initialization phase, and remains off afterwards until a valid ON message is received from the OCS (Occupant Classification System).