Hyundai Elantra AD Quiz
Engine Control System/Fuel System

Fuel Pump Motor Repair Procedures

In this manual: Engine Control System/Fuel System
General Information — 9Engine Mechanical System — 84Engine Electrical System — 60Emission Control System — 24Engine Control System/Fuel System — 90Automatic Transmission — 92Drive Shaft and Axle — 20Suspension System — 31Steering — 20Restraints — 50Brake System — 63Body (Interior and Exterior) — 214Body Electrical System — 221Heating, Ventilation, and Air Conditioning — 71
9steps
~54min
2/5difficulty
Done 0 of 9

Removal

  1. Remove the fuel pump. (Refer to Fuel System - "Fuel Pump")
  2. Disconnect the electric pump connector (A) and the fuel level sensor connector (B).
  3. Remove the module assembly (A) after releasing the cushion locking hooks.
  4. Disconnect the quick-connectors of the fuel tubes (B).
  5. Remove the fuel level sensor (A) in the direction indicated by the arrow.
  6. Remove the reservoir cup (B) after releasing the locking hooks (A).
  7. Disconnect the ground (A).
  8. Release the locking hooks, then remove the pre-filter (A) and the fuel pressure regulator (B).
  9. Remove the fuel pump motor (A) in the direction indicated by the arrow.

Installation

  1. Installation is the reverse of removal.

Test yourself

A quick Hyundai Elantra AD quiz: every answer comes with an explanation and a link to the manual page.