Hyundai Elantra AD Quiz
Engine Control System/Fuel System

Fuel Tank Repair Procedures

In this manual: Engine Control System/Fuel System
General Information — 9Engine Mechanical System — 84Engine Electrical System — 60Emission Control System — 24Engine Control System/Fuel System — 90Automatic Transmission — 92Drive Shaft and Axle — 20Suspension System — 31Steering — 20Restraints — 50Brake System — 63Body (Interior and Exterior) — 214Body Electrical System — 221Heating, Ventilation, and Air Conditioning — 71
13steps
~78min
3/5difficulty
0204060801005440N·mlb·ft
Tightening torque found on this page
Done 0 of 13

Removal

  1. Release the fuel line residual pressure. (Refer to Fuel System - "Release Fuel Line Residual Pressure")
  2. Remove the rear seat cushion. (Refer to Body - "Rear Seat Assembly")
  3. Remove the fuel pump service cover (A).
  4. Disconnect the fuel pump connector (A) and the fuel tank pressure sensor connector (B).
  5. Disconnect the quick-connector of the fuel feed tube (C).
  6. Disconnect the quick-connector of the vapor tube (D).
  7. Remove the rear left wheel and tire.
  8. Raise the vehicle and support the fuel tank with a jack.
  9. Disconnect the fuel tank hose (A).
  10. Disconnect the vent hose (B).
  11. Remove the lower cover (A).
  12. Remove the bolts securing the brake line bracket (A).
  13. Remove the fuel tank from the vehicle after removing the fuel tank band (A).
    • When removing the fuel tank, tilt the fuel tank as it interferes with the connection.

Installation

  1. Installation is the reverse of removal. Fuel tank band nut: 39.2 ~ 54 N·m

Test yourself

A quick Hyundai Elantra AD quiz: every answer comes with an explanation and a link to the manual page.