Hyundai Elantra AD Quiz
Engine Control System/Fuel System

Delivery Pipe Repair Procedures

In this manual: Engine Control System/Fuel System
General Information — 9Engine Mechanical System — 84Engine Electrical System — 60Emission Control System — 24Engine Control System/Fuel System — 90Automatic Transmission — 92Drive Shaft and Axle — 20Suspension System — 31Steering — 20Restraints — 50Brake System — 63Body (Interior and Exterior) — 214Body Electrical System — 221Heating, Ventilation, and Air Conditioning — 71
5steps
~30min
2/5difficulty
0102030405023.517N·mlb·ft
Tightening torque found on this page
Done 0 of 5

Removal

  1. Turn the ignition switch OFF and disconnect the negative (-) battery cable.
  2. Release the fuel line residual pressure. (Refer to Fuel System - "Release Fuel Line Residual Pressure")
    • When the fuel pump relay is removed, a diagnostic trouble code (DTC) is stored. Clear the DTC with GDS after completing the "Releasing Residual Fuel Pressure" procedure.
  3. Disconnect the injector connector (A).
  4. Disconnect the quick-connector of the fuel supply tube (B).
  5. Remove the mounting bolt (C), then remove the delivery pipe and injector assembly from the engine.

Installation

  1. Installation is the reverse of removal. Delivery pipe mounting bolt: 18.6 ~ 24 N·m

Test yourself

A quick Hyundai Elantra AD quiz: every answer comes with an explanation and a link to the manual page.