Hyundai Elantra AD Quiz
Body (Interior and Exterior)

Luggage Compartment Side Trim Repair Procedures

In this manual: Body (Interior and Exterior)
General Information — 9Engine Mechanical System — 84Engine Electrical System — 60Emission Control System — 24Engine Control System/Fuel System — 90Automatic Transmission — 92Drive Shaft and Axle — 20Suspension System — 31Steering — 20Restraints — 50Brake System — 63Body (Interior and Exterior) — 214Body Electrical System — 221Heating, Ventilation, and Air Conditioning — 71
7steps
~42min
2/5difficulty
Done 0 of 7

Replacement
  • Wear gloves to avoid cutting your hands.
  • When removing with a flat-blade screwdriver or removal tool, wrap the tools with protective tape to prevent damage to components.
  • When removing interior trim components, use a plastic panel removal tool to avoid damaging the surface.
  • Be careful not to bend or scratch the trim and panels.
  1. Remove the rear seat assembly. (Refer to Rear Seat - "Rear Seat Assembly")
  2. Carefully remove the rear door body side weatherstrip.
  3. Remove the rear door sill trim. (Refer to Interior Trim - "Door Scuff Trim")
  4. Remove the rear cross trim. (Refer to Interior Trim - "Rear Cross Trim")
  5. Loosen the retaining clips and screws, and remove the luggage partition side trim (A).
  6. Loosen the mounting bolts and screws, and remove the luggage compartment side trim (A).
  7. To install, reverse the removal procedure.
    • Replace any damaged clips (or pin-type retainers).

Test yourself

A quick Hyundai Elantra AD quiz: every answer comes with an explanation and a link to the manual page.