Hyundai Elantra AD Quiz
Body (Interior and Exterior)

Rear Armrest Repair Procedures

In this manual: Body (Interior and Exterior)
General Information — 9Engine Mechanical System — 84Engine Electrical System — 60Emission Control System — 24Engine Control System/Fuel System — 90Automatic Transmission — 92Drive Shaft and Axle — 20Suspension System — 31Steering — 20Restraints — 50Brake System — 63Body (Interior and Exterior) — 214Body Electrical System — 221Heating, Ventilation, and Air Conditioning — 71
3steps
~18min
2/5difficulty
Done 0 of 3

Replacement
  • When removing with a flat-blade screwdriver or removal tool, wrap the tools with protective tape to prevent damage to components.
  • Use a plastic panel removal tool to remove the interior trim parts without damaging the surface.
  • Be careful not to bend or scratch the trim and panels.
  1. Fold the rear seat back assembly [LH] (A) by pulling the folding lever in the direction of the arrow.
  2. Separate the rear armrest (A) after removing the cover and loosening the bolt.
  3. To install, reverse the removal procedure.

Test yourself

A quick Hyundai Elantra AD quiz: every answer comes with an explanation and a link to the manual page.