Hyundai Elantra AD Quiz
Body (Interior and Exterior)

Rear Seat Assembly Repair Procedures

In this manual: Body (Interior and Exterior)
General Information — 9Engine Mechanical System — 84Engine Electrical System — 60Emission Control System — 24Engine Control System/Fuel System — 90Automatic Transmission — 92Drive Shaft and Axle — 20Suspension System — 31Steering — 20Restraints — 50Brake System — 63Body (Interior and Exterior) — 214Body Electrical System — 221Heating, Ventilation, and Air Conditioning — 71
7steps
~42min
2/5difficulty
0102030405025.519N·mlb·ft
Tightening torque found on this page
Done 0 of 7

Replacement

[Rear Seat Cushion Assembly]
  1. Loosen the mounting bolts and remove the rear seat cushion assembly (A).
  2. Disconnect the rear seat cushion extension connector (A).
  3. To install, reverse the removal procedure.
  4. Remove the rear seat cushion assembly. (Refer to Rear Seat - "Rear Seat Assembly")
  5. Fold the rear seat back assembly (A) by pulling the folding lever in the direction of the arrow.
  6. Loosen the mounting bolts and remove the rear seat assembly (A).

    Tightening torque: 16.7 ~ 26 N·m

  7. To install, reverse the removal procedure.
[Rear Seat Back Assembly]

Test yourself

A quick Hyundai Elantra AD quiz: every answer comes with an explanation and a link to the manual page.