Hyundai Elantra AD Quiz
Body Electrical System

Rear Combination Lamp Repair Procedures

In this manual: Body Electrical System
General Information — 9Engine Mechanical System — 84Engine Electrical System — 60Emission Control System — 24Engine Control System/Fuel System — 90Automatic Transmission — 92Drive Shaft and Axle — 20Suspension System — 31Steering — 20Restraints — 50Brake System — 63Body (Interior and Exterior) — 214Body Electrical System — 221Heating, Ventilation, and Air Conditioning — 71
8steps
~48min
2/5difficulty
Done 0 of 8

Removal

  1. Disconnect the negative (-) battery terminal.
  2. Remove the outside rear combination lamp assembly (B) by disconnecting the connector (A).
  3. Remove the bulb (A) by turning it counterclockwise. [LED Type]
    [Bulb Type]
  4. Disconnect the inside rear combination lamp connector (A) after removing the rear combination lamp cover.
  5. Remove the inside rear combination lamp assembly after loosening the nuts.
  6. If the bulb needs to be replaced, remove the bulb after removing the luggage compartment cover.

Installation

  1. Install the inside combination lamp assembly after assembling the lamp.
  2. Install the rear combination lamp assembly after assembling the lamps and connecting the lamp connector.

Test yourself

A quick Hyundai Elantra AD quiz: every answer comes with an explanation and a link to the manual page.