Hyundai Genesis DH Quiz
Body (Interior and Exterior)

Hood Assembly Repair Procedures

In this manual: Body (Interior and Exterior)
General Information — 9Engine Mechanical System — 103Engine Electrical System — 54Emission Control System — 23Engine Control System/Fuel System — 127Automatic Transmission System (SBC) — 90All-Wheel Drive (AWD) System — 20Drive Shaft and Axle — 27Suspension System — 41Steering — 19Restraints — 56Brake System — 56Body (Interior and Exterior) — 211Body Electrical System — 279Heating, Ventilation, and Air Conditioning — 55
2steps
~12min
1/5difficulty
0102030405026.520N·mlb·ft
Tightening torque found on this page
Done 0 of 2

Replacement
  • When removing the fender, wrap protective tape around the screwdriver or pry tool to prevent damage to components.
  • An assistant is required to remove or install the hood.
  1. After removing the hood hinge mounting bolts (A), remove the hood assembly (B).

    Tightening torque: 21.6 ~ 26 N·m

  2. Install in the reverse order of removal.
    • Make sure the hood latches/unlatches and opens/closes properly.
    • If necessary, adjust the hood.

Test yourself

A quick Hyundai Genesis DH quiz: every answer comes with an explanation and a link to the manual page.