Hyundai Genesis DH Quiz
Engine Mechanical System

Tensioner Repair Procedures

In this manual: Engine Mechanical System
General Information — 9Engine Mechanical System — 103Engine Electrical System — 54Emission Control System — 23Engine Control System/Fuel System — 127Automatic Transmission System (SBC) — 90All-Wheel Drive (AWD) System — 20Drive Shaft and Axle — 27Suspension System — 41Steering — 19Restraints — 56Brake System — 56Body (Interior and Exterior) — 211Body Electrical System — 279Heating, Ventilation, and Air Conditioning — 55
7steps
~42min
2/5difficulty
02040608010053.940N·mlb·ft
Tightening torque found on this page
Done 0 of 7

Removal and Installation

  1. Remove the drive belt. (Refer to Valve Timing System - "Drive Belt")
  2. Remove the drive belt tensioner (A).

    Tightening torque: 44.1 ~ 54 N·m

  3. To install, reverse the removal procedure.

Inspection

Drive Belt, Tensioner, Belt Tensioner Pulley
  1. Inspect the tensioner pulley for excessive oil leakage, abnormal rotation or vibration. Replace if necessary.
  2. Check the belt tensioner for dust, cracks, and damage. Replace if necessary.
  3. Inspect the belt for maintenance and abnormal wear of the ribs. Replace if necessary.
  4. Check the pulleys for vibration during rotation and oil or dust buildup on the V-groove. Replace if necessary.

Test yourself

A quick Hyundai Genesis DH quiz: every answer comes with an explanation and a link to the manual page.