Power Door Mirror Actuator Repair Procedure

Inspection

1. 1
   Disconnect the negative (-) battery terminal.
2. 2
   Disconnect the connector (B) after removing the front door inner frame cover (A).

   

3. 3
   Disconnect the power outside rear view mirror connector (A) from the wiring harness.

   

4. 4
   Apply battery voltage to each terminal as shown in the table and check that the mirror operates correctly. [Turn Signal Lamp]

   

5. 5
   In the electrical system, malfunctions can be quickly diagnosed using the Global Diagnostic System (GDS).

   1. Self-Diagnosis: Checks malfunction and Diagnostic Trouble Code (DTC)
   2. Current Data: Check the system input/output status.
   3. Actuation Test: Check the system operating status
   4. Additional Functions: Controls other functions, including system parameter setting and zero point adjustment.
6. 6
   Select "Vehicle Model" and the system to be checked to inspect the vehicle with the tester.
7. 7
   Select "Driver Seat or Assist Seat Door Module (DDM/ADM)" to check the driver seat or assist seat door module (DDM/ADM).
8. 8
   Select the "Current Data" menu to check the current input/output status. The input/output data for the sensors related to the driver seat or assist door module (DDM/ADM) can be checked.

   

9. 9
   If you force-check the power door lock operation, select "Activation Check".