Power Mirror Switch Repair Procedures

Inspection

1. 1
   In the electrical system, malfunctions can be quickly diagnosed using the Global Diagnostic System (GDS).

   1. Trouble Code Inspection (DCT)
   2. Current Data: Check the system input/output status.
   3. Actuation Test: Check the system operating status
   4. Additional Functions: Controls other functions, including system parameter setting and zero point adjustment.
2. 2
   Select "Vehicle Model" and the system to be checked to inspect the vehicle with the tester.
3. 3
   Select "Driver Seat or Assist Seat Door Module (DDM/ADM)" to check the driver seat or assist seat door module (DDM/ADM).
4. 4
   Select the "Current Data" menu to check the current input/output status. The input/output data for the sensors related to the driver seat or assist door module (DDM/ADM) can be checked.

   

5. 5
   If you force-check the power door lock operation, select "Activation Check".

   

Removal

Wrap the screwdriver or puller tool with protective tape. Handle with care during storage and during disassembly/assembly, as it is easily contaminated by grease and oil. Be careful not to scratch or break the trim panel and the upper part of the door trim, as well as the wood grain (real wood) garnish. Be careful not to scratch the door trim and other parts.

1. 1
   Disconnect the negative (-) battery terminal.
2. 2
   Remove the front door trim panel.
3. 3
   Disconnect the DDM (Driver Door Module) connector (A) from the wiring harness.

   

4. 4
   Remove the obstacle cover (A) after loosening the mounting screws.

   

5. 5
   Remove the DDM (Driver Door Module) (A) after loosening the mounting screws.

   

   

Installation

1. 1
   Install the DDM (Driver Door Module).
2. 2
   Install the front door trim panel after reconnecting the related connectors.
3. 3
   Connect the negative (-) battery terminal.