Hyundai Genesis DH Quiz
Body (Interior and Exterior)

Trunk Lid Key Holder Repair Procedures

In this manual: Body (Interior and Exterior)
General Information — 9Engine Mechanical System — 103Engine Electrical System — 54Emission Control System — 23Engine Control System/Fuel System — 127Automatic Transmission System (SBC) — 90All-Wheel Drive (AWD) System — 20Drive Shaft and Axle — 27Suspension System — 41Steering — 19Restraints — 56Brake System — 56Body (Interior and Exterior) — 211Body Electrical System — 279Heating, Ventilation, and Air Conditioning — 55
4steps
~24min
2/5difficulty
0102030405010.88N·mlb·ft
Tightening torque found on this page
Done 0 of 4

Replacement
  • Wear gloves to avoid cutting your hands.
  • When removing with a flat-blade screwdriver or removal tool, wrap the tools with protective tape to prevent damage to components.
  • Be careful not to scratch the body surface.
  1. Remove the trunk lid trim. (Refer to Trunk Lid - "Trunk Lid Trim")
  2. Loosen the trunk lid key holder mounting bolts.
  3. Remove the trunk lid key holder (B) and disconnect the trunk lid key holder cable (A).

    Tightening torque: 6.9 ~ 10.8 N·m

  4. Install in the reverse order of removal.
    • Make sure the trunk lid locks/unlocks and opens/closes properly.
    • Replace all damaged clips.

Test yourself

A quick Hyundai Genesis DH quiz: every answer comes with an explanation and a link to the manual page.