Turn Signals and Lane Change Signals

To signal a turn, push the lever down to turn right, or up to turn left, to position (A). To signal a lane change, slightly pull the turn signal lever up or down and hold it in position (B). The signal returns to the OFF position when released or when the turn is completed.

If the indicator continues to light, does not flash, or flashes abnormally, a turn signal bulb may have burned out; in this case, have it inspected.

One-Touch Lane Change Indicator (if equipped)

To activate the one-touch lane change function, move the turn signal lever slightly, then release it. The turn signals will flash 3, 5 or 7 times.

You can enable/disable the one-touch flashing function or select the number of flashes (3, 5 or 7) in the user setting mode on the LCD screen.

For more information, refer to the "LCD Display" section in this chapter.

NOTICE

If the turn signal indicator remains on, does not flash, or flashes abnormally, a bulb may have burned out or there may be an electrical fault in the circuit. The bulb may need to be replaced.