Hyundai i20 Quiz
Engine Mechanical System

ENGINE OIL COOLER Repair Procedures

In this manual: Engine Mechanical System
General Information — 17Engine Mechanical System — 79Engine Electrical System — 50Emission Control System — 22Engine/Fuel Control System — 107Clutch System — 27MANUAL TRANSMISSION SYSTEM — 21Drive Shaft and Axle — 18Suspension System — 29Steering System — 21Restraint — 41Braking System — 53Body Work (Interior and Exterior) — 190Body Electrical System — 181Heating, Ventilation and Air Conditioning — 58
9steps
~54min
2/5difficulty
02040608010053.940N·mlb·ft
Tightening torque found on this page
Done 0 of 9

DEPOSIT

  1. Remove the engine undercover. (Refer to Engine and Transaxle Assembly - "Engine Undercover")
  2. Drain the coolant. (Refer to Cooling System - "Cooling".)
  3. Disconnect the coolant hoses from the oil cooler (A).
  4. Remove the oil filter. (Refer to Lubrication System - "Engine Oil")
  5. Loosen the fixing bolt (A) and remove the oil cooler assembly (B).

REMEDY

  1. Apply a thin layer of engine oil to the sealing surface of the oil cooler (A), then install the oil cooler with the fixing bolt (B).

    Tightening torque: 44.1~54 N·m

  2. Apply a thin layer of engine oil to the sealing surface of the oil filter, then install the oil filter. (Refer to Lubrication System - "Engine Oil")
  3. Connect the coolant hoses to the oil cooler (A).
  4. Fill the radiator with coolant and check for leaks.

Test yourself

A quick Hyundai i20 quiz: every answer comes with an explanation and a link to the manual page.