Hyundai Kona Quiz
Engine Mechanical System

Crankshaft Damper Pulley Repair Procedures

In this manual: Engine Mechanical System
General Information — 17Engine Mechanical System — 85Engine Electrical System — 50Emission Control System — 26Engine Control System/Fuel System — 152DCT (Dual Clutch Transmission) System — 50Four-Wheel Drive (4WD) System — 21Propeller Shaft and Axle (2WD-FF) — 28Suspension System (without ECS) — 32Steering — 21Restraints — 38Brake System — 64Body (Interior and Exterior) — 205Body Electrical System — 1Heating, Ventilation, and Air Conditioning — 66
5steps
~55min
5/5difficulty
5special tools
0204060801005238N·mlb·ft
Tightening torque found on this page
Done 0 of 5

Removal and Installation

  1. Remove the drive belt. (Refer to Timing System - "Timing Belt")
  2. Remove the engine cover. (Refer to Engine and Transaxle Assembly - Engine Cover)
  3. Remove the front passenger side wheel. (Refer to Suspension System - "Wheel")
  4. Remove the crankshaft damper pulley (A). Tightening torque: (46.1 - 52 N·m) + (38°–42°) [(4.7 - 5.3 kgf·m), (34.0–38.3 lbf·ft) + (38°–42°)]
  5. Installation is performed in the reverse order of removal, and installed with the groove facing as shown in the illustrations.

Test yourself

A quick Hyundai Kona quiz: every answer comes with an explanation and a link to the manual page.