Front Lower Arm Repair Procedures

Removal

1. 1
   Loosen the wheel nuts slightly. Raise the vehicle and make sure it is securely supported.
2. 2
   Remove the front wheel and tire (A) from the front hub.

   Tightening torque: 107.9–128 N·m

   

3. 3
   Loosen the lower arm nut (A) and remove the lower arm ball joint using the SST (09568-1S100).

   Tightening torque: 58.8–71 N·m

   

   

4. 4
   Remove the front lower arm after loosening the bolts and nuts. Tightening torque: Front: 117.7 - 137 N·m; Rear: 156.9 - 176 N·m

   

Inspection

1. 1
   Inspect the bushing for wear and damage.
2. 2
   Inspect the lower arm for bending or cracks.
3. 3
   Inspect the lower arm for deformation.
4. 4
   Check all bolts and nuts.

Installation

1. 1
   Install in the reverse order of removal.
2. 2
   Check the alignment. (Refer to Suspension System - "Alignment")

Replacement

1. 1
   Loosen the wheel nuts slightly. Raise the vehicle and make sure it is securely supported.
2. 2
   Remove the front wheel and tire (A) from the front hub.

   Tightening torque: 107.9–128 N·m

3. 3
   Loosen the lower arm nut (A) and remove the lower arm ball joint using the SST (09568-1S100).

   Tightening torque: 58.8–71 N·m

   

   

4. 4
   Remove the ball joint assembly by loosening the bolt (A) and nut (B).

   Tightening torque: 98.1 - 118 N·m

   

5. 5
   Replace the ball joint assembly with a new one.
6. 6
   Install in the reverse order of removal.