Hyundai Palisade Quiz
Body (Interior and Exterior)

Crash Pad Lower Panel

In this manual: Body (Interior and Exterior)
General Information — 10Engine Mechanical System — 56Engine Electrical System — 28Emission Control System — 21Engine Control System/Fuel System — 42Automatic Transmission System (A8LF1) — 33All-Wheel Drive (AWD) System — 16Drive Shaft and Axle — 19Suspension System — 28Steering — 17Restraints — 20Brake System — 39Body (Interior and Exterior) — 142Body Electrical System — 171Heating, Ventilation, and Air Conditioning — 47Advanced Driver Assistance System (ADAS) — 44
5steps
~30min
2/5difficulty
Done 0 of 5

Components and Component Location

Component Location

Hyundai Palisade. Components and components location
1. Crash Pad Lower Panel

Repair Procedures

Replacement

Hyundai Palisade. Repair procedures
  • When removing with a flat-blade screwdriver or puller, wrap the tool with protective tape to prevent damage to the components.
  • Wear gloves to avoid cutting your hands.
Hyundai Palisade. Repair procedures
  • Use a plastic panel removal tool to remove the interior trim parts without damaging the surface.
  • Be careful not to bend or scratch the trim and panels.
  1. Using a flat-tip screwdriver, remove the crash pad side cover [LH] (A).
    Hyundai Palisade. Repair procedures
  2. Loosen the mounting screws and remove the crash pad lower panel (A).
    Hyundai Palisade. Repair procedures
  3. Press the lock pin and disconnect the EPB connector (A).
    Hyundai Palisade. Repair procedures
  4. Press the lock pin and disconnect the diagnostic connector (A).
    Hyundai Palisade. Repair procedures
  5. To install, reverse the removal procedure.
    Hyundai Palisade. Repair procedures
    • Replace any damaged clips (or pin-type retainers).
    • Make sure the connector is properly connected.

Test yourself

A quick Hyundai Palisade quiz: every answer comes with an explanation and a link to the manual page.