Front Door Trim

Components and Component Location

Component Location

Repair Procedures

Replacement

Wear gloves to avoid cutting your hands.

When removing with a flat-blade screwdriver or puller, wrap the tool with protective tape to prevent damage to the components. Be careful not to scratch the door trim and other parts.

1. 1
   Remove the front door quadrant cover (A).

   

2. 2
   Disconnect the front door tweeter connector (A).

   

3. 3
   Loosen the mounting screw and remove the front door lower trim (A) using a flat-blade screwdriver.

   

4. 4
   Remove the front door inside handle (A).

   

5. 5
   Disconnect the front door window regulator connector (A) and the mirror switch connector (B).

   

   

6. 6
   To install, reverse the removal procedure.

   Make sure the connector is properly connected. Replace any damaged clips (or pin-type retainers). Check that the window operates properly.