Front Door Glass

Components and Component Location

Component Location

Repair Procedures

Replacement

Wear gloves to avoid cutting your hands.

When removing with a flat-blade screwdriver or puller, wrap the tool with protective tape to prevent damage to the components. Be careful not to scratch the door trim and other parts.

1. 1
   Remove the front door trim. (Refer to Front Door - "Front Door Trim")
2. 2
   Loosen the mounting screws and remove the front door side trim (A). Then remove the front door belt outer weatherstrip (B).

   

3. 3
   Remove the front door belt inside the weatherstrip (A).

   

4. 4
   Remove the plug hole cover (A).

   

5. 5
   While holding the power window switch, pull it down until the glass mounting bolt is visible through the plug hole.

   Be careful not to damage the glass surface.

6. 6
   Loosen the mounting bolt and remove the front door glass (A) by tilting it to one side.

   Tightening torque: 7.8–11.8 N·m

   

7. 7
   To install, reverse the removal procedure.

   Move the glass up and down to check that it moves smoothly. If necessary, adjust the glass position. Check that the door locks and opens properly.