All-Wheel Drive (AWD) System
Oil seal
In this manual: All-Wheel Drive (AWD) System
19steps
~114min
4/5difficulty
Done 0 of 19
Repair Procedures
Replacement
[Propeller shaft side oil seal]- Remove the under cover. (Refer to Engine Mechanical System - "Engine Room Under Cover")
- Remove the subframe. [Gasoline 3.5/3.8] (Refer to Suspension System - "Subframe")
- Remove the front drive shaft assembly. [Right side] (Refer to Drive Shaft and Axle - "Front Drive Shaft")
- Remove the front muffler. [Gasoline 3.5/3.8] (Refer to Engine Mechanical System - "Muffler")
- Remove the dust cover (A). [Diesel 2.2]
[Gasoline 3.5, 3.8]

- Remove the transfer oil seals (A), (B). [Diesel 2.2]
[Gasoline 3.5, 3.8]

- Replace the oil seal using the special service tool. [Diesel 2.2]
[Gasoline 3.5, 3.8]

- Remove the special service tools.
- Install a new dust cover.
- Install the front muffler. [Gasoline 3.5/3.8] (Refer to Engine Mechanical System - "Muffler")
- Install the front drive shaft assembly. [Right side] (Refer to Drive Shaft and Axle - "Front Drive Shaft")
- Install the subframe. [Gasoline 3.5/3.8] (Refer to Suspension System - "Subframe")
- Install the under cover. (Refer to Engine Mechanical System - "Engine Room Under Cover")
- Remove the transfer assembly. (Refer to All Wheel Drive (AWD) System - "Front Wheel Transfer Assembly")
- Remove the transfer assembly oil seal (A). [Diesel 2.2]
[Gasoline 3.8]

- Replace the oil seal using the special service tool. [Diesel 2.2]
[Gasoline 3.5, 3.8]

- Remove the special service tools.
- Install the transfer assembly. (Refer to All Wheel Drive (AWD) System - "Front Wheel Transfer Assembly")
- Install the under cover. (Refer to Engine Mechanical System - "Engine Room Under Cover")
Test yourself
A quick Hyundai Palisade quiz: every answer comes with an explanation and a link to the manual page.
Was this page helpful?