Body Electrical System
Window Regulator Motor
In this manual: Body Electrical System
10steps
~60min
3/5difficulty
Done 0 of 10
Components and Component Location
Components

Repair Procedures
Inspection
Front Power Window Motor- Disconnect the negative (-) battery terminal.
- Remove the front door trim panel. (Refer to Body - "Front Door Trim")
- Disconnect the connector (A) from the motor. (A: Safety, B: Standard)

- Connect the motor terminals directly to battery voltage (12 V) and check that the motor operates smoothly. Then reverse the polarity and check that the motor operates smoothly in the reverse direction. If the operation is abnormal, replace the motor. [Standard Power Window]

- Connect terminal No. 2 and No. 3 to battery voltage (12 V) and check that the motor operates smoothly when connecting the terminals below. [Safety Window Motor]

- Disconnect the negative (-) battery terminal.
- Remove the rear door trim panel. (Refer to Body - "Rear Door Trim")
- Disconnect the connector (A) from the motor. (A: Safety, B: Standard)

- Connect the motor terminals directly to battery voltage (12 V) and check that the motor operates smoothly. Then reverse the polarity and check that the motor operates smoothly in the reverse direction. If the operation is abnormal, replace the motor. [Standard Power Window]

- Connect terminal No. 2 and No. 3 to battery voltage (12 V) and check that the motor operates smoothly when connecting the terminals below. [Safety Window Motor]

Test yourself
A quick Hyundai Palisade quiz: every answer comes with an explanation and a link to the manual page.
Was this page helpful?