Body (Interior and Exterior)

Rear Door Side Weatherstrip

5steps
~30min
2/5difficulty
0102030405032.424N·mlb·ft
Tightening torque found on this page
Done 0 of 5

Repair Procedures

Replacement

[Rear Door Side Weatherstrip]

  1. Loosen the adjusting shim bolt (B) of the rear door.

    Tightening Torque: 21.6–32 N·m

  2. Disconnect the clips, then remove the rear door side weatherstrip (A).
    Hyundai Palisade. Repair procedures
  3. To install, reverse the removal procedure.
    Hyundai Palisade. Repair procedures
    • Replace any damaged clips (or pin-type retainers).

[Rear Door Side Body Weatherstrip]

  1. Disconnect the clips, then remove the rear door body side weatherstrip (A).
    Hyundai Palisade. Repair procedures
  2. To install, reverse the removal procedure.

Test yourself

A quick Hyundai Palisade quiz: every answer comes with an explanation and a link to the manual page.