Repair Procedures

Inspection

1. 1
   Remove the front door trim panel. (Refer to Body - "Front Door Trim")
2. 2
   Remove the front door module. (Refer to Body - "Front Door Module")
3. 3
   Disconnect the actuator connectors.

   

4. 4
   Check the actuator operation by connecting power and ground according to the table.

   Pin	Driver	Passenger
   1	-	M2
   2	-	M3
   3	COM	-
   4	Lock/Unlock Switch	ADJUSTER
   5	ADJUSTER	Lock/Unlock Switch
   6	-	COM
   7	M3	-
   8	M2	-

   
   

   

   

   

5. 5
   Remove the rear door trim panel. (Refer to Body - "Rear Door Trim")
6. 6
   Remove the rear door module. (Refer to Body - "Rear Door Module")
7. 7
   Disconnect the actuator connectors.

   

8. 8
   Check the actuator operation by connecting power and ground according to the table.

   Pin	Driver		Passenger
   	Central Locking	Power Child Lock	Central Locking	Power Child Lock
   1	-	Child Lock Power Switch	M1	M2
   2	COM	COM	M2	M3
   3	Lock/Unlock Switch	Lock/Unlock Switch	-	M1
   4	ADJUSTER	ADJUSTER	-	M4
   5	-	M4	ADJUSTER	ADJUSTER
   6	-	M1	Lock/Unlock Switch	Lock/Unlock Switch
   7	M2	M3	COM	COM
   8	M1	M2	-	Child Lock Power Switch

   
   [Central Locking]

   

   [Child Lock]

   

   [Central Locking]

   

   

   [Child Lock]

   

   

9. 9
   Remove the rear door trim panel. (Refer to Body - "Rear Door Trim")
10. 10
    Disconnect the 4P connector from the actuator.

    

11. 11
    Check the actuator operation by connecting power and ground according to the table.

    

    

12. 12
    Disconnect the connector and bolts from the hood switch.

    

13. 13
    Check the continuity between the terminals and ground according to the table.