Hyundai Palisade Quiz
Restraints

Side Impact Sensor (SIS)

In this manual: Restraints
General Information — 10Engine Mechanical System — 56Engine Electrical System — 28Emission Control System — 21Engine Control System/Fuel System — 42Automatic Transmission System (A8LF1) — 33All-Wheel Drive (AWD) System — 16Drive Shaft and Axle — 19Suspension System — 28Steering — 17Restraints — 20Brake System — 39Body (Interior and Exterior) — 142Body Electrical System — 171Heating, Ventilation, and Air Conditioning — 47Advanced Driver Assistance System (ADAS) — 44
~1min read

Components and Component Location

Components

Hyundai Palisade. Components and components location
1. Gravity Side Impact Sensor [G-SIS (Center Pillar)]
2. Gravity Side Impact Sensor [G-SIS (C-Pillar)]		 3. Front Side Impact Sensor (P-SIS)

Description and Operation

Description

The Side Impact Sensor (SIS) system consists of two types of side impact sensors. The G-SIS sensors are installed in the center of each front door module (left and right), and two rear sensors are installed in the rear pillars (left and right).
  • The front side impact sensor is also called P-SIS because it detects pressure caused by a collision at its installation location.
  • The rear side impact sensor is also called A-SIS because it detects acceleration caused by a collision at its installation location.
The SRSCM determines airbag deployment and deployment timing through the SIS collision signal when a collision occurs.

Test yourself

A quick Hyundai Palisade quiz: every answer comes with an explanation and a link to the manual page.