SRS Care

The SRS requires virtually no maintenance, and there are no parts that you can safely service yourself. If the SRS warning light does not come on when the ignition switch is in the ON position, or remains on continuously, have your vehicle inspected immediately by an authorized HYUNDAI dealer.

Any work on the SRS, such as removal, installation, repair, or any work on the steering wheel, front passenger panel, front seats, and roof rails, must be performed by an authorized HYUNDAI dealer. Improper handling of the SRS may result in serious injury.

WARNING

To reduce the risk of serious injury or death, observe the following precautions:

• Do not attempt to modify or disconnect SRS components or wiring, including adding any type of badges to the pads or modifications to the body structure.
• Do not place objects on or near the airbag modules in the steering wheel, instrument panel, or front passenger panel above the glove box.
• Clean airbag module covers with a soft cloth dampened with plain water. Solvents or cleaners may adversely affect the airbag covers and proper system deployment.
• Always have deployed airbags replaced by an authorized HYUNDAI dealer.
• If SRS components must be discarded, or if the vehicle is to be scrapped, certain precautions must be observed. Consult an authorized HYUNDAI dealer for the necessary information. Failure to observe these precautions may increase the risk of personal injury.