Body Electrical System
Turn Signal Indicator
In this manual: Body Electrical System
17steps
~102min
4/5difficulty
Done 0 of 17
Repair Procedures
Removal
Outside Mirror Turn Signal Lamp
|
- Disconnect the negative (-) battery terminal.
- Remove the front door trim panel. (Refer to Body - "Front Door Trim")
- Remove the outside mirror cover (A).

- Disconnect the mirror connector (A).

- Loosen the mounting nuts and remove the outside mirror.

- Disconnect the negative (-) battery terminal.
- Disconnect the DRL connector (A).

- Remove the DRL after loosening the mounting bolts.

- Disconnect the negative (-) battery terminal.
- Remove the rear combination lamp. (Refer to Lighting System - "Rear Combination Lamp")
Installation
Outside Mirror Turn Signal Lamp- Install the outside mirror assembly, then connect the connector.
- Connect the negative (-) battery terminal.
- Install the DRL.
- Connect the DRL connector.
- Connect the negative (-) battery terminal.
- Install the rear combination lamp.
- Connect the negative (-) battery terminal.
Test yourself
A quick Hyundai Palisade quiz: every answer comes with an explanation and a link to the manual page.
Was this page helpful?
