Advanced Driver Assistance System (ADAS)
Warning Indicator
In this manual: Advanced Driver Assistance System (ADAS)
9steps
~54min
2/5difficulty
Done 0 of 9
Components and Component Location
Components

| 1. Warning Indicator | 2. SVM Camera |
Repair Procedures
Removal
- Disconnect the negative (-) battery terminal.
- Remove the front door trim panel. (Refer to Body - "Front Door Trim")
- Remove the outside rear view mirror cover (A).

- Disconnect the mirror connector (A).

- Loosen the mounting nut and remove the outside rear view mirror.

- Using a clip remover (C), remove the mirror (A) as shown in the illustration below.



- Protect the mirror from the removal tool by wrapping it with cloth (B).
- Be careful not to damage the mirror and mirror housing during the removal process.
- Apply force around the center of the mirror, because applying force to the end of the mirror will break it.
- Disconnect the heater wire connectors (A) and remove the mirror.

Installation
- Install the outside mirror.
- Connect the negative (-) battery terminal.
Inspection
- Disconnect the power outside mirror connector from the wiring harness.


Test yourself
A quick Hyundai Palisade quiz: every answer comes with an explanation and a link to the manual page.
Was this page helpful?