Hyundai Tucson Quiz
Body Work (Interior and Exterior)

Rear Seat Frame

In this manual: Body Work (Interior and Exterior)
General Information — 17Engine Mechanical System — 51Engine Electrical System — 26Emission Control System — 23Engine/Fuel Control System — 44Clutch System — 12MANUAL TRANSMISSION SYSTEM — 12AUTOMATIC TRANSMISSION SYSTEM — 42Four-Wheel Drive (4WD) System — 14Drive Shaft and Axle — 22Suspension System — 30Steering System — 16Restraint — 21Braking System — 47Body Work (Interior and Exterior) — 145Body Electrical System — 162Heating, Ventilation and Air Conditioning — 39
10steps
~60min
3/5difficulty
02040608010053.940N·mlb·ft
Tightening torque found on this page
Done 0 of 10

Components and Component Location

COMPONENT LOCATION

(LH)

1. Entire Rear Seat Back Frame

(RH)

1. Entire Rear Seat Back Frame

Repair Procedures

REPLACEMENT

[Second Row Seat Set]

(LH)

  1. Remove the rear seat assembly. (Refer to Rear Seat - "Rear Seat")
  2. Remove the rear seat back covering [G]. (Refer to Rear Seat - "Rear Seat")
  3. Remove the rear seat cushion cover. (Refer to Rear Seat - "Rear Seat Cushion Cover")
  4. Loosen the mounting bolt and remove the seat belt buckle. Front seat belt.

    Tightening torque: 44.1~54 N·m

  5. To install, perform the removal procedure in reverse order.

(RH)

  1. Remove the rear seat assembly. (Refer to Rear Seat - "Rear Seat")
  2. Remove the rear seat back trim [D]. (Refer to Rear Seat - "Rear Seat")
  3. Remove the rear seat cushion cover. (Refer to Rear Seat - "Rear Seat Cushion Cover")
  4. Loosen the mounting bolt and remove the seat belt buckle. Front seat belt.

    Tightening torque: 44.1~54 N·m

  5. To install, perform the removal procedure in reverse order.

Test yourself

A quick Hyundai Tucson quiz: every answer comes with an explanation and a link to the manual page.