Hyundai Tucson Quiz
Body Work (Interior and Exterior)

Rear Seat Assembly

In this manual: Body Work (Interior and Exterior)
General Information — 17Engine Mechanical System — 51Engine Electrical System — 26Emission Control System — 23Engine/Fuel Control System — 44Clutch System — 12MANUAL TRANSMISSION SYSTEM — 12AUTOMATIC TRANSMISSION SYSTEM — 42Four-Wheel Drive (4WD) System — 14Drive Shaft and Axle — 22Suspension System — 30Steering System — 16Restraint — 21Braking System — 47Body Work (Interior and Exterior) — 145Body Electrical System — 162Heating, Ventilation and Air Conditioning — 39
7steps
~42min
2/5difficulty
0102030405025.519N·mlb·ft
Tightening torque found on this page
Done 0 of 7

Components and Component Location

COMPONENT LOCATION

1. Rear seat cushion assembly 2. Rear seat back assembly

Repair Procedures

REPLACEMENT

[Rear Seat Cushion Assembly]
  1. Remove the rear seat cushion assembly (A).
  2. Disconnect the rear seat cushion extension connector (A). (LH)
    (RH)
  3. Remove the rear seat cushion assembly. (Refer to Rear Seat - "Rear Seat")
  4. Remove the rear package tray (A).
  5. Remove the luggage tray (A).
  6. Loosen the mounting bolts, then remove the rear seat (B).

    Tightening torque: 16.7 ~ 26 N·m N·m

    (Front)
    (Rear)
  7. To install, perform the removal procedure in reverse order.
[Rear Seat Back Assembly]

Test yourself

A quick Hyundai Tucson quiz: every answer comes with an explanation and a link to the manual page.