Hyundai Tucson Quiz
Body Work (Interior and Exterior)

Front Seat Frame

In this manual: Body Work (Interior and Exterior)
General Information — 17Engine Mechanical System — 51Engine Electrical System — 26Emission Control System — 23Engine/Fuel Control System — 44Clutch System — 12MANUAL TRANSMISSION SYSTEM — 12AUTOMATIC TRANSMISSION SYSTEM — 42Four-Wheel Drive (4WD) System — 14Drive Shaft and Axle — 22Suspension System — 30Steering System — 16Restraint — 21Braking System — 47Body Work (Interior and Exterior) — 145Body Electrical System — 162Heating, Ventilation and Air Conditioning — 39
4steps
~24min
2/5difficulty
02040608010053.940N·mlb·ft
Tightening torque found on this page
Done 0 of 4

Components and Component Location

COMPONENT LOCATION

1. Front Seatback Frame Assembly 2. Front Seat Cushion Frame Assembly

Repair Procedures

REPLACEMENT

  1. Remove the front seatback rear cover. (Refer to Front Seat - Front Seat Back Cover)
  2. Remove the front seat cushion cover. (Refer to Front Seat - Front Seat Cushion Cover)
  3. Loosen the mounting bolts, then separate the front seat back (A) from the front seat cushion frame (B).

    Tightening torque: 44.1~54 N·m

  4. To install, perform the removal procedure in reverse order.

Test yourself

A quick Hyundai Tucson quiz: every answer comes with an explanation and a link to the manual page.