Turn Signals

Left-Hand Drive

Right-Hand Drive

Lower the turn signal lever to signal a left turn, or raise it to signal a right turn (A).

To signal a lane change, move and hold the turn signal lever to the position (B). The lever returns to its original position when you release it or once the turn is completed.

If the turn signal indicator stays on continuously instead of flashing, or if it flashes abnormally, a bulb may have burned out. In that case, the bulb must be replaced.

Auto Flasher Function (if equipped)

To activate the auto flasher, lightly push the turn signal lever and then release it. The turn signal will flash 3, 5, or 7 times.

You can enable/disable this function and select the number of flashes (3, 5, or 7) in the User Settings mode on the LCD screen. For more information, refer to the "LCD Display" section in this chapter.