Hyundai Tucson Quiz
Braking System

EPB Switch Repair Procedures

In this manual: Braking System
General Information — 17Engine Mechanical System — 51Engine Electrical System — 26Emission Control System — 23Engine/Fuel Control System — 44Clutch System — 12MANUAL TRANSMISSION SYSTEM — 12AUTOMATIC TRANSMISSION SYSTEM — 42Four-Wheel Drive (4WD) System — 14Drive Shaft and Axle — 22Suspension System — 30Steering System — 16Restraint — 21Braking System — 47Body Work (Interior and Exterior) — 145Body Electrical System — 162Heating, Ventilation and Air Conditioning — 39
4steps
~24min
2/5difficulty
Done 0 of 4

DEPOSIT

parking brake switch
  1. Disconnect the battery negative cable.
  2. Remove the floor console upper cover. (Refer to Body group - "Console")
  3. Disconnect the EPB switch connector (A).
  4. To install, perform the removal procedure in reverse order.

Inspection

  1. Check the continuity of the circuit between the switch terminals when the EPB switch is turned on.
    Pin No. Function Pin No. Function
    1 ALL1 13 IG (+)
    2 CBR MODE 14 IND NE
    3 CN 15 SPA INDICATOR
    4 ISG MODE 16 DMS MODE
    5 PAS/RPAS MODE 17 PAS/RPAS INDICATOR
    6 Eco mode active 18 EPB SW 4
    7 B. 19 EPB SW 2
    8 FULL-TIME 4WD LOCK MODE 20 RELAXATION ENTRY
    9 ISG INDICATOR 21 AUTO HOLD MODE
    10 STEP MODE 22 EPB SW 3
    11 SPA MODE 23 EPB SW 1
    12 IG (+) 24 MASS

Test yourself

A quick Hyundai Tucson quiz: every answer comes with an explanation and a link to the manual page.