Hyundai Tucson Quiz
Body Work (Interior and Exterior)

FRONT PILLAR GARNISH

In this manual: Body Work (Interior and Exterior)
General Information — 17Engine Mechanical System — 51Engine Electrical System — 26Emission Control System — 23Engine/Fuel Control System — 44Clutch System — 12MANUAL TRANSMISSION SYSTEM — 12AUTOMATIC TRANSMISSION SYSTEM — 42Four-Wheel Drive (4WD) System — 14Drive Shaft and Axle — 22Suspension System — 30Steering System — 16Restraint — 21Braking System — 47Body Work (Interior and Exterior) — 145Body Electrical System — 162Heating, Ventilation and Air Conditioning — 39
2steps
~12min
2/5difficulty
Done 0 of 2

Components and Component Location

COMPONENT LOCATION

1. Front Pillar Trim

Repair Procedures

REPLACEMENT

  1. Remove the front pillar trim.
    1. To remove the front pillar garnish, use the tool shown below (A).
    2. Slightly lift the front pillar trim, insert a tool, and pull to remove the retaining clip (A).
    3. Remove the front pillar trim (A).
  2. To install, perform the removal procedure in reverse order.

Test yourself

A quick Hyundai Tucson quiz: every answer comes with an explanation and a link to the manual page.