Hyundai Tucson Quiz
Four-Wheel Drive (4WD) System

Oil Seal: Repair Procedures

In this manual: Four-Wheel Drive (4WD) System
General Information — 17Engine Mechanical System — 51Engine Electrical System — 26Emission Control System — 23Engine/Fuel Control System — 44Clutch System — 12MANUAL TRANSMISSION SYSTEM — 12AUTOMATIC TRANSMISSION SYSTEM — 42Four-Wheel Drive (4WD) System — 14Drive Shaft and Axle — 22Suspension System — 30Steering System — 16Restraint — 21Braking System — 47Body Work (Interior and Exterior) — 145Body Electrical System — 162Heating, Ventilation and Air Conditioning — 39
14steps
~94min
5/5difficulty
2special tools
Done 0 of 14

REPLACEMENT

2.0 GDI gasoline

[Right side]
  1. Remove the drive shaft (side D) (Refer to Axle and Propeller Shaft - Front Drive Shaft)
  2. Remove the dust cover (A).
  3. Remove the oil seal (A, B).
  4. Install the oil seal using the special service tool.
  5. Install a new dust cover (A).
  6. Add transmission fluid (Refer to 4WD Drive System - Transmission Fluid)
  7. Install the drive shaft assembly (side D) (Refer to Axle and Propeller Shaft - Front Drive Shaft)
  8. Remove the transfer assembly from the transmission. (Refer to Transfer Case System - Front Wheel Drive)
  9. Remove the oil seal (A).
  10. Install the oil seal using the special service tool.
  11. Add transmission fluid (Refer to 4WD Drive System - Transmission Fluid)
  12. Install the transfer assembly. (Refer to 4WD Drive System - Full Time 4WD)
[Left side]

1.6 T-GDI Gasoline

  1. Remove the oil seal (A).
  2. Install a new oil seal using SST (No.: 09473-D3600, 09231-H1100).

Test yourself

A quick Hyundai Tucson quiz: every answer comes with an explanation and a link to the manual page.