Four-Wheel Drive (4WD) System

Transmission Fluid: Repair Procedures

16steps
~96min
4/5difficulty
02040608010058.843N·mlb·ft
Tightening torque found on this page
Done 0 of 16

Inspection

  1. Remove the under cover. (Refer to Engine Mechanical System - "Engine Compartment Under Cover")
  2. Remove the filler cap (A). [2.0 GDI gasoline]
    [1.6 T-GDI gasoline]
  3. Check the oil level.
  4. Install the filler plug with a new gasket.

    Tightening torque: 39.2 ~ 59 N·m

  5. Install the under cover. (Refer to Engine Mechanical System - "Engine Compartment Under Cover")

REPLACEMENT

  1. Remove the under cover. (Refer to Engine Mechanical System - "Engine Compartment Under Cover")
  2. Drain the oil from the transmission by removing the drain plug (A). [2.0 GDI gasoline]
    [1.6 T-GDI gasoline]
  3. Install the drain plug with a new gasket.

    Tightening torque: 58.9 ~ 78 N·m

  4. Remove the filler cap (A). [2.0 GDI gasoline]
    [1.6 T-GDI gasoline]
  5. Refill with new oil through the filler opening. Standard oil: API GL-5, SAE 75W/90 hypoid gear oil (SHELL HD AXLE OIL 75W/90 or equivalent). Oil capacity: 2.0 GDI gasoline: approx. 0.3 L (0.09 US gal, 0.37 US qt, 0.31 Imp. qt) 1.6 T-GDI gasoline: approx. 0.5 L (0.13 US gal, 0.53 US qt, 0.44 Imp. qt)
  6. Install the filler plug with a new gasket.

    Tightening torque: 39.2 ~ 59 N·m

  7. Install the under cover. (Refer to Engine Mechanical System - "Engine Compartment Under Cover")

Test yourself

A quick Hyundai Tucson quiz: every answer comes with an explanation and a link to the manual page.